1350W · 20 Bar
DSP Espresso Machine KA-3125
The DSP KA-3125 is a full coffee station on your counter: beans go into the 150 g hopper, the built-in grinder works through 20 settings, and the 20-bar pump pulls proper espresso through a 51 mm die-cast aluminium funnel — hot or cold. The thermoblock heats fast, the touchscreen handles grinding, one-cup, two-cup and milk frothing, and the steam nozzle and drip tray lift off for cleaning.
20 Settings
Built-in Grinder1.7 L
Water Tank☕
20 Bar · 51mm Funnel
High-pressure pump through a die-cast aluminium funnel for real crema.
⚙️
Grinder Built In
150 g bean hopper with 20 grind settings — beans to cup in one machine.
🥛
Hot or Cold + Frother
Touchscreen brews hot or cold espresso and froths milk for lattes.
🛡️
Safe & Tidy
Overheat and overpressure protection; steam nozzle and drip tray lift off.
Technical Specifications
| Brand | DSP |
|---|---|
| Model | KA-3125 |
| Product SKU | KA-3125 |
| Product Type | 3-in-1 Espresso Machine (Grinder + Brewer + Frother) |
| Rated Power | 1350W |
| Voltage | 220–240V 50/60Hz |
| Pump | 20 Bar High-Pressure Pump |
| Heating | Thermoblock Rapid Heating |
| Water Tank | 1.7 L |
| Bean Hopper | 150 g |
| Grinder | Built-in, 20 Grind Settings |
| Brewing Funnel | 51 mm Die-Cast Aluminium |
| Control | Multifunction Touchscreen (1/2 Cups, Hot/Cold Espresso, Froth) |
| Body | ABS + Stainless Steel (SUS430) Trim |
| Safety | Overheat & Overpressure Protection |
| Cleaning | Removable Steam Nozzle + Drip Tray |
| Accessories | Aluminium Funnel, 1-Cup & 2-Cup Filters (SUS304), Measuring Spoon, Powder Collector |
Ideal For
- ▪Fresh beans-to-cup mornings
- ▪Cappuccino and latte lovers
- ▪Hot and cold espresso drinks
- ▪Small offices and studios
- ▪Home barista setups
Setup & Safe Use
- Fill & Load: Fill the 1.7L tank and pour beans into the 150 g hopper.
- Pick a Grind: Choose one of 20 grind settings on the touchscreen.
- Brew or Froth: Select one-cup, two-cup, hot or cold espresso, then froth the milk.
- Care and Safety: Rinse the removable steam nozzle and empty the drip tray; overheat and overpressure protection are built in.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.